A MEMS Clearinghouse® and information portal
for the MEMS and Nanotechnology community
RegisterSign-In
MEMSnet Home About Us What is MEMS? Beginner's Guide Discussion Groups Advertise Here
News
MEMSnet Home: MEMS-Talk: coating on Silicon Nitride to deposit Gold
coating on Silicon Nitride to deposit Gold
2003-08-24
Nikhil Mehta
2003-08-25
Kirt & Erika Zipf-Williams
2003-08-25
Roger Shile
2003-08-26
David Ovrokzky
2003-08-25
Mahavir Sanghavi
2003-08-25
Knighton, Ed
2003-08-25
[email protected]
coating on Silicon Nitride to deposit Gold
[email protected]
2003-08-25
Hi Nick,

Knighton is right, Au will never stick to Ti when use as seedlayer, I
myself have try before. use Cr/Au as seedlayer. but if you have to use Ti
as seedlayer then you have to plate a very thin layer of Ni onto Ti then Au
will stick to it.

good luck,

AJ Pang

On Mon, 25 Aug 2003 14:34:24 -0400, "Knighton, Ed" 
wrote:

>       Hi Nick,
>       I think a very thin later of chromium will work, chrome sticks to
> every thing and gold  sticks to the chromium very well.
>
>       Ed Knighton, Process Engineer
>       Constellation Tech.Inc.
>
> > -----Original Message-----
> > From:       Nikhil Mehta [SMTP:[email protected]]
> > Sent:       Sunday, August 24, 2003 4:30 PM
> > To: [email protected]
> > Subject:    [mems-talk] coating on Silicon Nitride to deposit Gold
> >
> > hi:
> > We at present are do a titanium coating on Silicon Nitride on
> which we
> > deposit Gold (as gold does not stick to Nitride). I am looking
> for
> > literature to find if we can replace titanium with any other
> material on
> > which we can deposit Gold and at the same time this material is
> not
> > sensitive to KOH etching (Titanium is sensitive to KOH etching).
>
> >
> > I tried to find some literature on this but no success. Can any
> one help
> > me in my dilemma
> >
> > thanks
> >
> > Nick
> > Graduate Student
> > Auburn University
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site design software
> > _______________________________________________
> > [email protected] mailing list: to unsubscribe or change your
> list
> > options, visit
> http://mail.mems-exchange.org/mailman/listinfo/mems-talk
> > Hosted by the MEMS Exchange, providers of MEMS processing
> services.
> > Visit us at http://www.memsnet.org/
>
> _______________________________________________
> [email protected] mailing list: to unsubscribe or change your
> list
> options, visit
> http://mail.mems-exchange.org/mailman/listinfo/mems-talk
> Hosted by the MEMS Exchange, providers of MEMS processing
> services.
> Visit us at http://www.memsnet.org/
>

________________________________________________________________

DISCLAIMER:

This e-mail and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to
whom it is addressed.  If you are not the intended recipient
you are prohibited from using any of the information contained
in this e-mail.  In such a case, please destroy all copies in
your possession and notify the sender by reply e-mail.  Heriot
Watt University does not accept liability or responsibility
for changes made to this e-mail after it was sent, or for
viruses transmitted through this e-mail.  Opinions, comments,
conclusions and other information in this e-mail that do not
relate to the official business of Heriot Watt University are
not endorsed by it.
________________________________________________________________

reply
Events
Glossary
Materials
Links
MEMS-talk
Terms of Use | Contact Us | Search
MEMS Exchange
MEMS Industry Group
Coventor
Harrick Plasma
Tanner EDA
University Wafer
Addison Engineering
MEMStaff Inc.
Mentor Graphics Corporation