A MEMS Clearinghouse® and information portal
for the MEMS and Nanotechnology community
RegisterSign-In
MEMSnet Home About Us What is MEMS? Beginner's Guide Discussion Groups Advertise Here
News
MEMSnet Home: MEMS-Talk: Re: Nitride membranes
Re: Nitride membranes
1996-01-24
CarlosMastrangelo&ltcarlosm@eecs.umich.edu
1996-01-29
Yuchong Tai
1996-02-02
rfair@ee.duke.edu
Re: Nitride membranes
Yuchong Tai
1996-01-29
About the rupture of nitride membrane, here's some information for you about
our experience at Caltech.

For 3x3 mm2, low-stress nitride, 1-2,000 A diapgragm, the rupture pressure is
as high as 30 psi. These diaphragms have been used for X-ray microscopy.

For 8x8 mm2, 1-um low-stress nitride diaphragm, it's about 20 psi.

For 1x1 mm2, 1.5-um diaphragm, the highest pressure we observed is 70 psi.

However, the burst pressure depends on the quality of the nitride and the
boundary conditions a lot. In general, the fracture strength of the thin-film
low-sstress nitride is around 3-4%.


reply
Events
Glossary
Materials
Links
MEMS-talk
Terms of Use | Contact Us | Search
MEMS Exchange
MEMS Industry Group
Coventor
Harrick Plasma
Tanner EDA
Process Variations in Microsystems Manufacturing
Harrick Plasma, Inc.
Tanner EDA by Mentor Graphics
The Branford Group