Thats right.

And to speed up etching that is to further icrease the <100>/SiO2 etch
rate ratio, add pyrazine to the EDP.  Receipies are available.

Good luck,

-Ashutosh-

On Fri, 12 Apr 2002, Amit Shiwalkar wrote:

Hello,

500 um is a hugh depth, I dont know what is your feature size. SiO2 will
not withstand KOH and there are problems even with TMAH. My suggestion is
that you use Ethylene Diamine + Pyrocatechol mixture, where SiO2 will serve
as an effective etch mask.

Regards
Amit Shiwalkar

aslam muhammad wrote:

> Hi Friends
>
>               I want to use TMAH and KOH as etchant to
> etch bulk silicon ( 500 micron).  which one is more
> suitable.  my etch mask is SiO2.  what is the recipe
> of a good etching rate KOH and TMAH please.
>
> Thankx
>
> M. Aslam




"Your reality is a figment of my Imagination"
      ......... To me you exist because I imagine that you do.
_______________________________________________
[email protected] mailing list: to unsubscribe or change your list
options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk
Hosted by the MEMS Exchange, providers of MEMS processing services.
Visit us at http://www.mems-exchange.org/

================================================================================
        Ashutosh Shastry                Research Associate,
        Graduate Student,               Microelectronics Group,
        School of  Biosciences and      Electrical Engineering Dept.,
        Bioengineering,
        Phone: 091-22-5721791           I.I.T. Bombay, INDIA 400 076.
        Email: [email protected]        Phone:091-22-5723655
===============================================================================
        O Traveller, there is no such thing as PATH...
                                        .....paths are MADE by walking.
================================================================================